The Manubloc conveyor is a grasshopper conveyor with light frame and trough-shaped belt (width from 300mm to 1200mm). It is adjustable to any use and will suit your worksite needs. It can be moved and can rotate as well thanks to its modular design. It is often used as a movable lift.
The Manubloc belt conveyor is delivered in different units: you can watch the assembly video to see how easy it is to put together. It can also be assembled in our workshops and delivered as one piece. Additional parts are available to improve and adapt your conveyor.
Manubloc belt conveyors are straightforward, compact and modular
Manubloc belt conveyors allow you to choose among many options to suit your needs: you can choose the belt type, add a cover, add a belt weighing system, add an inflection, make it a grasshopper conveyor system and make it movable/rotating.
Standard equipment:
- Smooth or chevron type belts, width 300 to 1200 mm
- Frame of steel tubes
- Length between hearts pulleys 3 to 15 meter
- Drive by means of motor on the pulley
- Three phase motor power 0,55 Kw to 5,5 Kw.
- V=0,63 m/s to 2,5 m/s
- Rubber scraper at the head pulley
- Tightening device by screw at the foot end
- Set of two rollers of 60mm diameter
- Reception trough
- Belt type EP 250/2-2+1, endless
- Pre-mounted electrical installation according to CEE Norm
Documentation:
REQUEST FOR PARTS
Grasshopper conveyor : Manubloc : technical characteristics
Largeur de bande | 300 mm | 400 mm | 500 mm | 650 mm | 800mm | 1000 mm | 1200 mm |
---|---|---|---|---|---|---|---|
Puissance minimum - entraînement standard | 0,55 Kw | 1,1 Kw | 3,0 Kw | 3,0 Kw | 3,0 Kw | 4,0 Kw | 4,0 Kw |
Puissance maximale - entraînement standard | 0,55 Kw | 1,1 Kw | 4,0 Kw | 5,5 Kw | 5,5 Kw | 5,5 Kw | 5,5 Kw |
Hauteur de structure | 260 mm | 260 mm | 300 mm | 300mm | 300mm | 300mm | 300mm |
Largeur de structure | 420 mm | 520 mm | 740 mm | 890 mm | 1040mm | 1240mm | 1440 mm |
Section des longerons tubulaires (diamètre) | 30 x 2 mm | 30 x 2 mm | 30 x 3 mm | 30 x 3 mm | 30 x 3 mm | 30 x 3 mm | 30 x 3 mm |
Diamètre du tambour de tête (standard minimum) | 135 mm | 135 mm | 220mm | 220mm | 220mm | 220mm | 220mm |
Diamètre du tambour de tête (standard maximum) | 160 mm | 160 mm | 320 mm | 320 mm | 320 mm | 320 mm | 320 mm |
Diamètre du tambour de pied | 135 mm | 135 mm | 220 mm | 220 mm | 220 mm | 220 mm | 220 mm |
Diamètre des rouleaux | 60 mm | 60 mm | 60 mm | 60 mm | 60 mm | 60 mm | 60 mm |
Longueur nominale de l'élément de tête | 1 m | 1 m | 1 m | 1 m | 1 m | 1 m | 1 m |
Longueur totale de l'élément de tête | 1,20 m | 1,20 m | 1,20 m | 1,25 m | 1,25 m | 1,25 m | 1,25 m |
Longueur nominale de l'élément de pied | 1 m | 1 m | 1 m | 1 m | 1 m | 1 m | 1 m |
Longueur totale de l'élément de pied | 1,45 m | 1,45 m | 1,50 m | 1,50 m | 1,50 m | 1,50 m | 1,50 m |
Longueur des modules intermédiaires | au choix 5 m - 2 m - 1 m - 0,5 m |