Manuextract and storage hopper for cleanup
Manuextract Tecnitude
Extractor belt Manuextract
Manuextract E.A 650
Extractor belt Manuextract in action
Extractor belt Manuextract
Extractor belt Manuextract
Tecnitude's Manuextract is a belt feeder, a belt extractor, a flow regulator that allows conveyor withdrawal, extraction or flow management under or in silos and hopper outlet. The fine-tuning of belt extractors allows for a constant and precise flow of material.
Storage hopper, material transfer hopper or feed hopper
Built in steel, pyramid shaped or monobloc, the Tecnitude hopper units can be used for storage (for grains, cereals, aggregates..) and for feeding conveyors belt. Hoppers also serve to narrow down the flow on the next belt.
For handling sticky materials, Tecnitude advices to use a pneumatic beating mechanism installed on the side of the hopper to avoid sticking together of the material. This system also enables the even discharge of material.
Manuextract conveyor operation
The Manuextract conveyor’s main function is to steadily manage a flow of extracted materials located on its conveyor belt. It can also be used to automatically empty hoppers by means of flow control. Thanks to Tecnitude’s extractor, everything will be easier. You only need to adjust flow control and monitor flow speed. Make sure to check our online calculation tool to figure out the flow rate you need.
Extraction and quantity measuring conveyor belt
Positioned under the outlet of the hopper, the Manuextract extraction belt is used for material draw off or regulation of output. The principle function is to assure a regular and stable draw of material to be transported.
A full material handling system
To complete your material handling system, Tecnitude offers a range of hopper kits to feed belt conveyors and to store materials. We also provide Manukit and Manubloc belt conveyors covering a wide range of applications depending on your needs.
The following video shows one of the Tecnitude belt extractors at work:
Documentation:
REQUEST FOR PARTS
Conveyor-extractor Manuextract : technical characteristics
| Bandwidth | 500 mm | 650 mm | 800 mm | 1000 mm | 1200 mm |
|---|---|---|---|---|---|
| Inter-axle cylinder/drum pulley | to 1,25m at 3m | to 1,25m at 3m | to 1,25m at 3m | to 1,25m at 3m | to 1,25m at 3m |
| Nominal installed power | 2,2 Kw | 3,0 Kw | 3,0 Kw | 4,0 Kw | 5,50 Kw |
| Nominal cylinder/drum pulley diameter | 220 mm | 220 mm | 220 mm | 220 mm | 325 mm |
| Installation height | 560 mm | 560 mm | 560 mm | 560 mm | 680 mm |
| Installation width (except mechanization) | 800 mm | 950 mm | 1100 mm | 1300 mm | 1560 mm |
| Power strap section | 500 X 500 mm | 600 X 600 mm | 600 X 600 mm | 600 X 600 mm | 700 X 700 mm |
| Nominal vein width | 300 mm | 450 mm | 600 mm | 800 mm | 1000 mm |
| Nominal vein thickness | 120 mm | 150 mm | 180 mm | 200 mm | 250 mm |
| Nominal flow of 0,20 m/s | 25 m3/h | 47 m3/h | 75 m3/h | 112 m3/h | 174 m3/h |
| Nominal flow of 0,50 m/s | 63 m3/h | 118 m3/h | 188 m3/h | 280 m3/h | 435 m3/h |